top of page

Maritime Hacking Kampung | SINCON 2026

Oct 1
2 min read

Updated: Oct 12


The Maritime Hacking Kampung is a space for a gentle introduction to maritime technologies. Attendees get hands-on with the systems a ship actually runs, and work through the attack paths that apply to them in the real world.


It is built around a working simulation of a merchant vessel, which attendees are invited to attack. The simulation models a KVLCC2-class VLCC tanker. It runs 5 programmable controllers speaking Modbus TCP, a live NMEA 2000 instrument bus over CAN, shipboard networks segmented across VLANs behind an industrial firewall, and the bridge, engine room, cargo control and switchboard consoles used by a ship’s crew.


Vessel behaviour is computed from physical models, including a hydrostatic model of the hull evaluated against IMO criteria.


Audience & Level

No maritime background is assumed. An attendee with no exposure to shipboard systems can sit down at Station 1 and be capturing live navigation traffic within 10 minutes.


For attendees with existing skills, the depth comes from studying schematics, reversing control loops, and defeating safety instrumented systems.


Stations

6 stations, each with a short demonstration followed by a hands-on task. The sequence

follows the path an attacker takes through a vessel, and attendees can work through them in order or join at any station.


  1. The Bridge & the Instrument Bus

    Capture traffic on the live instrument bus, decode a position message, then inject a false position and observe a marine chart plotter display it.

  2. The Engine Room

    Fingerprint a controller using a device identification request, locate the command registers, and change the state of the main engine.

  3. The Switchboard

    Open the generator breakers to black out the vessel. The first attempt is refused by the blackout prevention interlock, which publishes a refusal code. Locate the code, interpret it, disable the interlock, and repeat.

  4. The Safety System

    Spoof a ballast tank’s level gauge and command a fill. An independent overfill channel detects the true level and closes the valve. Defeat both channels to complete the overfill, and the vessel takes a list.

  5. The Lying Panel

    Freeze the engine transducers so the bridge continues to indicate steady steaming while the vessel loses way. Then identify the cross-check that exposes the deception.


  6. The Watch Officer's Bench

    Locate one of the above attacks in the intrusion detection and SIEM stack and write a signature for it. Then work an attack that generates no alert, and determine what control would have detected it.

 
 
 

Comments


Commenting on this post isn't available anymore. Contact the site owner for more info.
bottom of page